Warning: before proceeding to the configuration, please associate and install the device first.
Wired Smart Thermostat
In the device screen section (Menu – Devices), select the details below:
-
Relay mode: activate the relay according to the heating generator to which it's wired,
- Boiler
- Boiler with tank
- Heat pump
- Zone pump
- Fancoil
-
Relay controlled rooms: select all the rooms which will manage the thermostat on/off signal; if there is more than one wired Smart Thermostat, rooms can be split accordingly (the same room cannot be associated to more than one thermostat);
- Association: select the room to which the thermostat is associated to.
WARNING: when the Winter mode is on (Menu-Settings-Season), the Smart Thermostat can manage every heating generator in the relay list.
If the Summer mode is on, instead, the Smart Thermostat will only manage a Heat pump or a Fancoil.
|
Non-wired Smart Thermostat
In the device screen section (Menu – Devices), select the details below:
- Relay mode: the option is 'Off.
- Relay controlled rooms: no room should be selected. If one or more rooms are selected, the radiofrequency signal will be sent to the device, however, as the thermostat is non-wired, the heating generator will not be activated.
- Association: select the room to which the thermostat is associated to.
|