IRSAP NOW devices (hydraulic and electric) must be associated with the IRSAP NOW app in order to function.
One of the key steps in the app is the creation of rooms, with which devices will then be associated.
Subsequently, NOW hydraulic devices can also be used in manual mode:
- By turning the plastic shell of the Smart Valves, the setpoint can be changed (make sure you have not activated the manual change block in the app)
- By pressing the ^ and v buttons on the Smart Thermostat, you can scroll through the rooms and change the setpoint for each of them
- Pressing and holding the central button on the starter will force the boiler to switch on.
Smart electric radiators can also be used in manual mode after pairing, again making sure that you have not activated the manual change block in the app.
ATTENTION: if manual changes are made on devices, these will only be implemented in the app if the devices are 'connected'. If these are 'Not connected', the data will not be updated in the app until the cloud connection is restored.