If the Connection Unit signal is weak or there is poor communication between the Connection Unit and the devices of the IRSAP NOW System, you can add a Connection Unit and associate it to the system as a Repeater.
The Connection Unit range of action is normally around 10 mt (34 ft), and the repeater mode helps to strengthen the signal going back and forth from the Connection Unit to the devices and vice versa.
Please be reminded that this device cannot be connected to a WiFi network, but will communicate via radio frequency with the Connection Unit only.
Where should the Repeater be placed?
The IRSAP NOW Repeater should be positioned equidistant between the Connection Unit and the devices that show communication issues.
Does the Repeater IRSAP NOW require wiring?
The Connection Unit, when used in Repeater mode, must only be plugged to the electrical socket (not to the modem), and it will communicate with the Connection Unit via radio frequency.