| The Smart Valve is IRSAP's wireless intelligent thermostatic valve designed to optimise radiator efficiency. |  |
FUNCTIONS
-
the valve detects the temperature in the room where it is installed thanks to an integrated temperature probe, and then transmits it to the app
-
the valve allows the setpoint of the radiator/room in which it is installed to be changed, either manually or via app
-
the valve regulates the opening/closing degree of the hydraulic valve, thanks to an adaptive algorithm (created and owned by IRSAP)
HOW IT WORKS
When the Smart Valve probe detects a temperature below the set temperature in the room, the device pushes to open the plunger and allow hot water to flow through the radiator.
When the temperature in the room reaches the setpoint, instead, the sensor activates the Smart Valve to close the water flow.
HOW TO USE THE SMART VALVE
- Via App
Each Smart Valve only regulates the radiator on which it is installed: in the app, the device must be associated with a room (the one in which the radiator is located).
To adjust the temperature of a room, simply open the app, select the room and rotate the slider to the desired temperature value.
Alternatively, schedules can be set.
- Manually
Rotate the shell clockwise/anticlockwise to change the temperature.
Each click is equivalent to a 0.1°C change of the setpoint.
Each LED colour corresponds to a specific temperature range.